| Product ID: |
55 |
| Category: |
Primers |
| Product Description: |
A premium quality moisture resistant, vapor barrier primer/sealer latex. IMMCO Vapor Barrier Primer is designed to prevent the transmission of moisture through the substrate on which it has been applied. Its hi-hide formula may be used on drywall (wallboard) plaster, masonry or concrete surfaces. It is specially formulated to provide extremely high opacity on a wide variety of substrates. It may also replace the use of plastic vapor barrier sheeting behind the wall in some jurisdictions as per building code requirements. |
| Colours Available: |
Accent base |
| Finish: |
Matte |
| Vehicle Type: |
Latex Emulsion |
| Pigment Type: |
Selected Inert Pigments |
| Solvent Type: |
Water |
| Flash Point (Min): |
N/A |
| Recommended Dry Film: |
1.5 – 3.0 mils |
| % Solids by Weight: |
45% |
| Coverage (Theoretical): |
300 - 350 ft2/gal. (8 - 10 metres2/litre) |
| Viscosity at 77°F (25C): |
95 Krebs Units |
| Avg. Drying Time at 77°F (25C): |
30 Minutes Tack Free, 2 Hours Dry |
| Recommended Thinner: |
Water |
| Recommended Primer: |
N/A |
| Surface Preparation: |
The surface must be clean and free from any loose potentially contaminating matter & excessive moisture. Any drywall joints and other patched areas must be thoroughly dry and free from sanding dust. |
| Application: |
IMMCO Vapor Barrier Primer/Sealer maybe applied by brush (synthetic bristle), roller of suitable nap length (10 - 20mm), conventional or airless spray. If applying by airless spray, use a tip of between .015" - .018” for best results. |
| Resistances: |
Especially designed to resist the transmission of moisture and other related vapor through the substrate on which it has been applied. |
| Additional Info: |
Keep material from freezing.
Stir thoroughly prior to use.
Clean up with warm soapy water. Moisture Vapor Transition Rates (Perm Rating) After: 24 hours - 31.82 gm2, 48 Hours - 50.00 gm2, 72 hours 45.45. gm2, (Average 42.4 gm2) Perm rating is less than 1.
Consult your IMMCO Specialty Products representative for additional information. |
