PermanentCoatings.com - Say Goodbye to Painting!



home links site map contact us Permanent Coatings, Victoria BC  
About Us Commercial Residential Benefits Warranty Testimonials Dealership Inquiries IMMCO Specialty Products Ltd - Permanent Coatings, Victoria, BC
Permanent Coatings, a new era in Paint Technology

Products

IMMCO Thermal Roof-Coat

Product ID: 85
Category: Elastomeric Coatings
Product Description: An environmentally friendly, high build, energy saving, thermal resistant, and Low temperature flexible coating for use on a wide variety of roofing surfaces such as: Aged build-up, polyurethane foam, galvanized steel, or cured concrete. Designed to be self-priming on most substrates, bridge and fill hairline cracks. IMMCO Thermal Roof-Coat is perfect for coating roofs that require protection from heat, harsh weather and climatic elements. It may be used to extend the life of an old roof and added protection on new roof. IMPORTANT: Roof-Coat is designed as a topcoat to be applied over existing roofing systems for aesthetics, heat reflection and protection of the functional roofing system. The coatings are not meant to provide the weatherproofing layer as this is the function of the main roofing system.
Colours Available: White, Medium, Deep and Accent Colours
Finish: Matte
Vehicle Type: 100% Acrylic Emulsion
Pigment Type: Titanium Dioxide and Selected Inert Pigments
Solvent Type: Water
Flash Point (Min): N/A
Recommended Dry Film: 1st coat 12-15 mils, 2nd coat 12-15 mils.
% Solids by Weight: 66%
Coverage (Theoretical): 1st coat 75-100 ft2/gal., 2nd coat 100-150 ft2/gal. Application may vary depending upon method of application, type of surface and job conditions.
Viscosity at 77∞F (25C): 135+ Krebs Units
Avg. Drying Time at 77∞F (25C): 1 hour to touch, 6 – 8 hours dry
Recommended Thinner: Water
Recommended Primer: IMMCO Alkaline Resistant Primer/Sealer.
Surface Preparation: The surface to receive the coating must be clean and free from all dirt, grease, scale, tar, bird droppings, sap, mildew, fungus and all other surface contaminants. Ensure that all new and bare wood is suitably primed with the appropriate primer. Pressure washing, sandblasting, sanding, scraping, or any other manner, which thoroughly cleans the surface and removes any possible contaminants, must be performed to ensure proper adhesion. The use of proper cleaning techniques is strongly recommended so as to ensure proper application, maximum adhesion, and best results.
Application: Apply by brush, lint free roller applicator of suitable nap length (i.e. 20mm+nap, or split foam pile), conventional or airless sprayer. If using an airless sprayer, for best results, ensure that the tip being used has an orifice of at least .035” to ensure the maximum mil thickness is applied. If necessary, dilute up to 10% with clean water and stir thoroughly. Do not apply at temperatures below 10 deg. C (approx 50 deg. F).
Resistances: IMMCO Thermal Roof-Coat displays excellent resistance to various climatic conditions such as: Temperature change, salt spray, high humidity, rain, sun, mildew, fungus, cracking, peeling, blistering, fading, artificial and premature weathering.
Additional Info: Keep material from freezing.
Stir material thoroughly before use.

^ top