PermanentCoatings.com - Say Goodbye to Painting!



home links site map contact us Permanent Coatings, Victoria BC  
About Us Commercial Residential Benefits Warranty Testimonials Dealership Inquiries IMMCO Specialty Products Ltd - Permanent Coatings, Victoria, BC
Permanent Coatings, a new era in Paint Technology

Products

IMMCO Supreme Inside Paint

Product ID: 30
Category: Interior Paint
Product Description: IMMCO Supreme Inside Paint is designed for interior application, and shows high scrub resistance; good block resistant and outstanding stain resistance. The pleasing selective sheens offer resistance to dirt, ease of cleaning and increased protection. Protects against microbial elements.
Colours Available: White, Medium, Deep and Accent colours
Finish: Semi-gloss, Eggshell, Flat
Vehicle Type: Acrylic Emulsion
Pigment Type: Titanium dioxide and Specially Selected Pigments
Solvent Type: Water
Flash Point (Min): N/A
Recommended Dry Film: 4-6 mils first coat, 8-10 mils second coat, 10+ mils third coat
% Solids by Weight: 59-60%
Coverage (Theoretical): First Coat 125-150 sq.ft/gal., (3-3.5 sq.metres /litre), second coat 150-180 sq. ft./gal. (3.5-4 Sq.metre /litre). Actual coverage will vary depending on the method of application, type of surface and job conditions.
Viscosity at 77°F (25C): 105-115 Kreb Units
Avg. Drying Time at 77°F (25C): 2 Hours to touch, 6 – 8 Hours Dry
Recommended Thinner: Water
Recommended Primer: Primer is recommended for this series
Surface Preparation: The surface to receive the paint must be completely dry and free from any dirt, grease, efflorescence, mildew, fungus and all other surface contaminants. Moisture content of the substrate should be less than 15%.
Application: IMMCO Supreme inside paint may be applied by brush (synthetic bristle), roller of suitable nap length, (i.e.: 20-30mm nap recommended) airless or conventional sprayer. If applying by airless sprayer, ensure that the tip being used has an orifice of .030” or greater. This will ensure superior results. It is highly recommended that 8 – 10 mil coat be applied for maximum durability and best results.
Resistances: IMMCO Supreme Inside paint exhibits excellent resistance to stain, humidity, mold, mildew, fungus, cracking, peeling, blistering and fading.
Additional Info: Stir thoroughly prior to use. Keep from Freezing.

^ top